LEFT SIDE · 1 PIECE
The vehicle’s left fender.
Driver’s side on a left-hand-drive car; passenger’s side on a right-hand-drive car.
OE reference: 1125106-50-J
訂單滿 $149 免運費
30天免費退換貨
30 天價格保障
終身客戶支援
聯絡我們
OEM Side Repeater Camera for Tesla Model 3/Y (HW3.0)
TESERY · MODEL 3/Y REPLACEMENT PARTS
Replace a failed HW3.0 side repeater camera and turn-signal assembly with a complete, side-specific OEM replacement.
YOUR FIT. ALREADY NARROWED DOWN.
Confirm the vehicle and camera hardware first. Then choose the side that needs replacement.
| Your vehicle | What to choose |
|---|---|
| 2021–2023 Tesla Model 3 · HW3.0 | Left Side, Right Side or Left + Right Pair. |
| 2020–2023 Tesla Model Y · HW3.0 | Left Side, Right Side or Left + Right Pair. |
| HW4 / AI4 camera hardware | Do not order this assembly. |
| 2024+ Model 3 Highland | Not compatible. Choose a Highland-specific camera. |
| Previously repaired or converted vehicle | Match the installed label, connector and housing before ordering. |
This is a like-for-like HW3.0 replacement—not an HW4/AI4 upgrade.
ONE CLEAR SELECTION
View left and right from inside the car while facing forward. Steering-wheel position does not change the vehicle side.
LEFT SIDE · 1 PIECE
Driver’s side on a left-hand-drive car; passenger’s side on a right-hand-drive car.
OE reference: 1125106-50-J
RIGHT SIDE · 1 PIECE
Passenger’s side on a left-hand-drive car; driver’s side on a right-hand-drive car.
OE reference: 1125107-50-J
Need both sides? Choose Left + Right Pair (2 Pieces) to receive one left assembly and one right assembly.
ONE COMPLETE ASSEMBLY
The camera, side turn-signal light, connector body and mounting housing arrive together as one side-specific replacement assembly.
Vehicle wiring, installation tools and calibration service are not included.
KEEP THE REPAIR FOCUSED
Use the year range as the first check. If repair history is uncertain, compare the existing label, connector and housing.
Choose one side for a side-specific failure, or the two-piece pair when both assemblies need replacement.
A black camera feed or warning can also come from wiring or another system fault. Have the failed component diagnosed before installation.
PLAN THE INSTALLATION
Have a Tesla-experienced technician complete the repair and applicable software checks.
Protect the paint, remove the existing repeater, connect the replacement and secure the mounting points.
Follow Tesla’s applicable side repeater replacement procedure, including the DAS reset and camera calibration steps.
Verify the camera feed, turn signal and physical fit before relying on the affected driver-assistance features.
Camera self-calibration can require up to 100 miles (160 km), depending on road and driving conditions.
WHY BUY FROM TESERY
Defined years, HW3.0 fitment and plain-language side options reduce ordering mistakes.
If hardware has been changed, share a photo of the existing assembly and label through TESERY store chat before ordering.
Review the TESERY shipping policy and return policy for your destination and order.
BEFORE YOU ORDER
It is a complete side-specific assembly with the camera, turn-signal light, connector body and housing. It is not a cosmetic cover.
It fits listed 2021–2023 Model 3 vehicles using HW3.0 side repeater hardware. It is not for Model 3 Highland or HW4/AI4 hardware.
It fits listed 2020–2023 Model Y vehicles using HW3.0 side repeater hardware. Match previously converted vehicles by their installed part.
Face forward from inside the car. Left is the vehicle’s left fender; right is the vehicle’s right fender.
No. Left Side and Right Side each contain one assembly. Choose Left + Right Pair for both sides.
Plan for the applicable DAS reset, camera calibration and functional checks. Self-calibration may require up to 100 miles (160 km).
No. It is a like-for-like HW3.0 replacement and does not convert the vehicle to newer camera hardware.
MADE SIMPLE
Choose Left Side, Right Side or the Pair—then plan installation and calibration with your technician.
重要通知:
如果安裝後遇到任何問題,請在拆除產品前先與我們聯繫。
提供車輛詳細資訊(型號/年份/車輛識別碼 VIN)以及照片或短影片,將有助於我們更快解決您的問題。
在故障排除前拆除或更改產品,可能會導致無法退貨或更換。
TESERY 退貨政策
我們致力於為您提供無憂且愉快的購物體驗。如果您需要退回商品,我們提供清楚且便利的退貨服務。
1.取消訂單
您可以在訂單寄出前申請取消訂單。
如果您的訂單已經寄出,我們會盡力攔截,但不保證一定成功。
請透過電子郵件或我們的線上客服提交取消申請。
2. 30 天退貨政策
您有權在收到商品之日起 30 天內申請退貨。為確保流程順利,請務必在這 30 天期限內聯絡我們並提出退貨申請。
3. 退貨資格
如要符合退款資格,退回的商品必須符合以下條件:
商品必須維持收到時的相同狀態——未穿戴、未使用、吊牌完整,並置於原包裝內。
須提供購買證明。
4. 退貨原因與相關費用
我們處理兩種類型的退貨:
品質問題或商品損壞:
若您收到的商品有瑕疵、損壞,或收到錯誤商品,請立即聯絡我們。我們將提供全額退款或換貨,並承擔所有相關費用。
非品質相關退貨(例如個人偏好):
若因個人偏好而退貨(例如改變心意,或對顏色或款式不滿意),將收取 15% 的補貨費,且退貨運費由顧客負擔。
5. 退貨流程
如要開始退貨,請依照以下步驟操作:
聯絡我們:
寄送電子郵件至 support@tesery.com / service@tesery.com 或使用我們的即時聊天功能告知我們您的退貨申請。
接收 instructions:
退貨申請獲核准後,我們會向您提供詳細的退貨 instructions,包括寄送地址與包裝指南。
將商品寄回:
請依照提供的指示將商品寄回。請注意,未事先申請退貨而直接寄回給我們的商品將不予受理。
6. 不可退貨商品
由於商品性質特殊,某些類型的商品不符合退貨資格:
客製化產品:例如明確標示為客製化產品的方向盤和車輪,不得因非品質相關問題退貨。
特定商品:包括禮品卡、危險物品或易燃液體/氣體。
如果您對特定商品是否符合資格有任何疑問,請在購買前聯絡我們。
7. 退款與換貨
退款:
我們收到並檢查您退回的商品後,會通知您退款是否已獲核准。核准的退款將在 1-5 個工作日內自動退回至您原先使用的付款方式。 實際入帳時間取決於您的銀行或信用卡公司。
換貨:
為最快確保您取得所需商品,我們建議您先退回現有商品;退貨獲得受理後,再另外購買新商品。
8. 售後支援要求
為確保公平且有效率地解決問題,客戶申請售後支援時必須提供必要資訊,包括但不限於:
- 車輛詳細資訊(車型、年份、VIN)
- 清楚描述問題
- 顯示問題的相關照片及/或簡短影片
請注意:
未提供所需資訊可能會使我們無法準確診斷問題,並可能導致退貨、退款或換貨處理延遲,甚至無法處理。
對於已安裝、改裝或在未事先溝通的情況下拆除的產品,若無法確認產品狀況,TESERY 保留拒絕退貨申請的權利。