Heat-Activated Recovery
Minor scratches and scuffs on the topcoat recover when warmed by sunlight or mild heat, keeping the film looking new through daily use.
TPU Rear Inner Door Protection Film for Model Y Juiper / Model 3 Highland | PPF
原價
MOP$214.00 MOP
特價
MOP$214.00 MOP
原價
單價
節省
%3Cp%3E%E8%B3%BC%E8%B2%B7%E6%AD%A4%E5%95%86%E5%93%81%E5%8F%AF%E7%8D%B2%E5%BE%97%20[points_amount]%20%E9%BB%9E%E6%95%B8%E3%80%82%3C/p%3E
付款選項
放心購物
-
訂單滿 $149 免運費
-
30天免費退換貨
-
30 天價格保障
-
終身客戶支援
聯絡我們
TPU Rear Inner Door Protection Film for Model Y Juiper / Model 3 Highland | PPF
產品描述
運送與退貨
Model Y Juniper / Model Y Standard / Model YL ·
Model 3 Highland / Model 3 Standard
TPU Rear Inner Door Protection Film Clear PPF. Precise. Durable.
Pre-cut clear TPU paint protection film for the rear inner door area of the latest Tesla Model Y and Model 3. Guards the factory paint against daily scuffs from feet, bags and child seats without changing the look of your car.
2 Pieces Full set per vehicle
Pre-cut Model-specific patterns
Self-Healing Nano TPU topcoat
Performance
Self-Healing Clear TPU, Built for Daily Use
Premium TPU with a nano self-healing coating, made to absorb light impact and recover from light surface marks over time.
No Yellowing Over Time
Ultra-transparent film blends invisibly with your paint. Formulated to resist UV-induced yellowing and edge lifting.
Repositionable Adhesive
Apply, remove, and reapply without leaving adhesive residue or damaging the factory paint surface.
Pre-Cut, No Trimming Required
Each piece is pre-cut to the rear inner door profile of your model. Align, press, and done, with no cutting on the car.
Fitment
Tesla Model Y & Model 3 Compatibility
Door panel shapes differ between Tesla generations. Select the option that matches your exact model before ordering.
Vehicle Model Year
Model Y Juniper 2025-ON
Model Y Standard 2026-ON
Model YL 2026-ON
Model 3 Highland 2024-ON
Model 3 Standard 2026-ON
Not sure which version you have? Contact us with your model year and sales region before ordering.
Driving a Pre-Refresh Model 3 or Model Y?
See our door corner clear protective film for classic Model 3 and Model Y.
Installation
Easy 3-Step DIY Installation
Clean the Surface
Wipe the rear inner door area thoroughly with an isopropyl alcohol wipe. Remove all dust, wax, and grease before applying.
Align & Press
Peel the backing and position the film. Press firmly from the centre outward using the squeegee card to eliminate air bubbles.
Cure & Drive
Allow 48 hours before washing. If small edge bubbles remain after application, lightly dampen with water and re-squeegee toward the edge.
Tip:
Install in a warm, dust-free environment. Warming the film slightly with a heat gun (low setting) helps it conform to curved surfaces without lifting edges.
FAQ
Common Questions
Which Tesla models does this rear inner door film fit?
It is pre-cut for Model Y Juniper (2025-ON), Model Y Standard (2026-ON), Model YL (2026-ON), Model 3 Highland (2024-ON) and Model 3 Standard (2026-ON). Please choose the option matching your car. For a pre-refresh Model 3 or Model Y, see our Classic Model 3 & Y Door Corner PPF.
What does the rear inner door film protect against?
It adds a clear TPU layer over the paint on the rear inner door area, helping protect it from everyday scuffs and light scratches caused by passengers getting in and out, bags, and daily contact.
What is included in the package?
Each order includes a 2-piece pre-cut set for one vehicle.
Will the PPF be visible after installation?
The crystal-clear high-gloss film is virtually invisible once properly installed and pressed down, so your paint keeps its original look.
Can I install it myself, and can I reposition it?
Yes. It is pre-cut for DIY installation with no trimming. The repositionable adhesive lets you lift and reapply the film within the first few minutes, before the adhesive fully sets, without leaving residue on the paint.
How does the self-healing TPU work?
The nano topcoat relaxes back into shape when warmed. Light surface scratches typically recover within minutes in direct sunlight, or faster with a heat gun on a low setting held a few inches from the film.
How long does it last, and how do I care for it?
Under normal use the film is designed to last several years. Wait 48 hours after installation before washing, then wash your car as normal. Avoid harsh solvents, abrasive polishes, and high-pressure water or steam aimed at the film edges.
重要通知：
如果安裝後遇到任何問題，請在拆除產品前先與我們聯繫。
提供車輛詳細資訊（型號/年份/車輛識別碼 VIN）以及照片或短影片，將有助於我們更快解決您的問題。
在故障排除前拆除或更改產品，可能會導致無法退貨或更換。
TESERY 退貨政策
我們致力於為您提供無憂且愉快的購物體驗。如果您需要退回商品，我們提供清楚且便利的退貨服務。
1.取消訂單
-
您可以在訂單寄出前申請取消訂單。
-
如果您的訂單已經寄出，我們會盡力攔截，但不保證一定成功。
-
請透過電子郵件或我們的線上客服提交取消申請。
2. 30 天退貨政策
您有權在收到商品之日起 30 天內申請退貨。為確保流程順利，請務必在這 30 天期限內聯絡我們並提出退貨申請。
3. 退貨資格
如要符合退款資格，退回的商品必須符合以下條件：
-
商品必須維持收到時的相同狀態——未穿戴、未使用、吊牌完整，並置於原包裝內。
-
須提供購買證明。
4. 退貨原因與相關費用
我們處理兩種類型的退貨：
-
品質問題或商品損壞：
-
若您收到的商品有瑕疵、損壞，或收到錯誤商品，請立即聯絡我們。我們將提供全額退款或換貨，並承擔所有相關費用。
-
-
非品質相關退貨（例如個人偏好）：
-
若因個人偏好而退貨（例如改變心意，或對顏色或款式不滿意），將收取 15% 的補貨費，且退貨運費由顧客負擔。
-
5. 退貨流程
如要開始退貨，請依照以下步驟操作：
-
聯絡我們：
-
寄送電子郵件至
support@tesery.com/ service@tesery.com 或使用我們的即時聊天功能告知我們您的退貨申請。
-
-
接收 instructions：
-
退貨申請獲核准後，我們會向您提供詳細的退貨 instructions，包括寄送地址與包裝指南。
-
-
將商品寄回：
-
請依照提供的指示將商品寄回。請注意，未事先申請退貨而直接寄回給我們的商品將不予受理。
-
6. 不可退貨商品
由於商品性質特殊，某些類型的商品不符合退貨資格：
-
客製化產品：例如明確標示為客製化產品的方向盤和車輪，不得因非品質相關問題退貨。
-
特定商品：包括禮品卡、危險物品或易燃液體／氣體。
如果您對特定商品是否符合資格有任何疑問，請在購買前聯絡我們。
7. 退款與換貨
-
退款：
-
我們收到並檢查您退回的商品後，會通知您退款是否已獲核准。核准的退款將在 1-5 個工作日內自動退回至您原先使用的付款方式。 實際入帳時間取決於您的銀行或信用卡公司。
-
-
換貨：
-
為最快確保您取得所需商品，我們建議您先退回現有商品；退貨獲得受理後，再另外購買新商品。
-
8. 售後支援要求
為確保公平且有效率地解決問題，客戶申請售後支援時必須提供必要資訊，包括但不限於：
- 車輛詳細資訊（車型、年份、VIN）
- 清楚描述問題
- 顯示問題的相關照片及／或簡短影片
請注意：
未提供所需資訊可能會使我們無法準確診斷問題，並可能導致退貨、退款或換貨處理延遲，甚至無法處理。
對於已安裝、改裝或在未事先溝通的情況下拆除的產品，若無法確認產品狀況，TESERY 保留拒絕退貨申請的權利。
