EV Charger Cable Retractor — 3.5 m, Self-Locking

原價 MOP$1,306.00 MOP
特價 MOP$1,306.00 MOP 原價
單價
節省
%3Cp%3E%E8%B3%BC%E8%B2%B7%E6%AD%A4%E5%95%86%E5%93%81%E5%8F%AF%E7%8D%B2%E5%BE%97%20[points_amount]%20%E9%BB%9E%E6%95%B8%E3%80%82%3C/p%3E
付款選項
  • Visa
  • Mastercard
  • American Express
  • Shop Pay
  • Apple Pay
  • Google Pay
  • Amazon
  • Discover
  • Diners Club
  • Bancontact
  • iDEAL Wero
  • USDC
提問

提問

* 必填欄位

尺寸指南 分享
放心購物
  • 30天免費退換貨

  • 30 天價格保障

    我們會退還差額。

  • 終身客戶支援

    一對一產品協助

    聯絡我們
EV Charger Cable Retractor — 3.5 m,  Self-Locking

EV Charger Cable Retractor — 3.5 m, Self-Locking

產品描述
運送與退貨

Why Choose Our Cable Retractor?

Self-Locking Cable Control

Pull down only the tether length you need and pause to lock it. Pull again to release, then guide the tether back under control after charging.

Wall or Ceiling. Your Choice.

Select Wall / Side Mount for a vertical wall or post. Select Ceiling / Top Mount for the underside of a ceiling, beam or overhead shelf. The retracting mechanism is the same.

Self-Locking Retraction. Less Drag. Less Tangle.

The retractor helps lift excess charging cable off the floor, reducing dragging and tangling. After charging, guide the tether back as it retracts to keep your charging area neat and organized.

High-Density Braided Tether

Built with a dense, multi-strand weave, the tether offers abrasion resistance and tensile strength for everyday charging cable management.

Compatibility & Fitment

Measure the charging setup—not only the car. This mechanical accessory does not carry electricity, so fit depends on cable outside diameter, supported cable weight, mounting surface and cable route rather than connector protocol or model year alone.

✓Compatible Setups

  • Tesla NACS, J1772 and Type 2 AC charging cables.
  • Model S, 3, X, Y, Cybertruck and other EVs, subject to the cable-fit checks above.
  • Confirm cable diameter, supported weight, mounting surface and cable route before installation.

×Do Not Install When

  • The clamp cannot securely hold the cable jacket.
  • No solid mounting surface is available.
  • The cable route would pull continuously on the vehicle connector.

Specifications

Product Name EV Charger Cable Retractor
Tether Length 3.5 m
Pull Force 3 kgf
Tether Construction High-density, multi-strand braided tether
Mounting Options Side Mount for a vertical wall or post; Ceiling Mount for an overhead surface. Select the version that matches your setup.
Main Function Supports excess charging cable to help reduce floor dragging and tangling.
Package Contents Cable tether, iron mounting plate and screws.

Charging cable and charger are not included. Position the retractor to support cable slack without applying continuous force to the connected charging plug.

Frequently Asked Questions

Does it fit every Tesla model and year?

It is vehicle-independent and can be used with Model S, 3, X, Y and Cybertruck. Confirm cable outside diameter, supported weight, mounting position and cable route before ordering.

Does it work with NACS, J1772 and Type 2 cables?

Yes in principle, because the unit supports the outside of the cable and carries no charging current. Compatibility still depends on cable diameter, weight and routing.

Will it change charging speed?

No. This is a mechanical cable-management accessory. Charging performance remains determined by the charger, circuit, cable and vehicle.

Should it pull on the charging plug while connected?

No. Position the unit and clamp so it supports cable slack without applying continuous upward or sideways force to the plugged-in connector.

Which mounting version should I choose?

Choose Wall / Side Mount for a vertical surface. Choose Ceiling / Top Mount for an overhead surface.

Can I mount it outdoors?

Install only where the unit and hardware are protected from conditions beyond their verified rating. Use a dry, structurally sound mounting surface.

What is included?

One cable retractor with tether, one mounting plate for the selected version and a set of mounting screws. The charging cable and charger are not included.


重要通知:

如果安裝後遇到任何問題,請在拆除產品前先與我們聯繫。

提供車輛詳細資訊(型號/年份/車輛識別碼 VIN)以及照片或短影片,將有助於我們更快解決您的問題。

在故障排除前拆除或更改產品,可能會導致無法退貨或更換。

TESERY 退貨政策

我們致力於為您提供無憂且愉快的購物體驗。如果您需要退回商品,我們提供清楚且便利的退貨服務。

1.取消訂單

  • 您可以在訂單寄出前申請取消訂單。

  • 如果您的訂單已經寄出,我們會盡力攔截,但不保證一定成功。

  • 請透過電子郵件或我們的線上客服提交取消申請。

2. 30 天退貨政策

您有權在收到商品之日起 30 天內申請退貨。為確保流程順利,請務必在這 30 天期限內聯絡我們並提出退貨申請。

3. 退貨資格

如要符合退款資格,退回的商品必須符合以下條件:

  • 商品必須維持收到時的相同狀態——未穿戴、未使用、吊牌完整,並置於原包裝內。

  • 須提供購買證明。

4. 退貨原因與相關費用

我們處理兩種類型的退貨:

  • 品質問題或商品損壞:

    • 若您收到的商品有瑕疵、損壞,或收到錯誤商品,請立即聯絡我們。我們將提供全額退款或換貨,並承擔所有相關費用。

  • 非品質相關退貨(例如個人偏好):

    • 若因個人偏好而退貨(例如改變心意,或對顏色或款式不滿意),將收取 15% 的補貨費,且退貨運費由顧客負擔。

5. 退貨流程

如要開始退貨,請依照以下步驟操作:

  1. 聯絡我們:

  2. 接收 instructions:

    • 退貨申請獲核准後,我們會向您提供詳細的退貨 instructions,包括寄送地址與包裝指南。

  3. 將商品寄回:

    • 請依照提供的指示將商品寄回。請注意,未事先申請退貨而直接寄回給我們的商品將不予受理。

6. 不可退貨商品

由於商品性質特殊,某些類型的商品不符合退貨資格:

  • 客製化產品:例如明確標示為客製化產品的方向盤和車輪,不得因非品質相關問題退貨。

  • 特定商品:包括禮品卡、危險物品或易燃液體/氣體。

如果您對特定商品是否符合資格有任何疑問,請在購買前聯絡我們。

7. 退款與換貨

  • 退款:

    • 我們收到並檢查您退回的商品後,會通知您退款是否已獲核准。核准的退款將在 1-5 個工作日內自動退回至您原先使用的付款方式。 實際入帳時間取決於您的銀行或信用卡公司。

  • 換貨:

    • 為最快確保您取得所需商品,我們建議您先退回現有商品;退貨獲得受理後,再另外購買新商品。

8. 售後支援要求

為確保公平且有效率地解決問題,客戶申請售後支援時必須提供必要資訊,包括但不限於:

- 車輛詳細資訊(車型、年份、VIN)
- 清楚描述問題
- 顯示問題的相關照片及/或簡短影片

請注意:

未提供所需資訊可能會使我們無法準確診斷問題,並可能導致退貨、退款或換貨處理延遲,甚至無法處理。

對於已安裝、改裝或在未事先溝通的情況下拆除的產品,若無法確認產品狀況,TESERY 保留拒絕退貨申請的權利。

★★★★★
★★★★★
★★★★★
★★★★★