Real Carbon Fiber Front Bumper Corner Trim for Model Y Juniper / Model 3 Highland
-
149ドル以上のご注文で送料無料
-
30日間の無料返品・交換
-
30日間価格保証
-
生涯カスタマーサポート
お問い合わせください
Real Carbon Fiber Front Bumper Corner Trim for Model Y Juniper / Model 3 Highland
Tesla Model Y Juniper / Model 3 Highland
Real Carbon Fiber Front Bumper Corner Trim for Tesla Model Y Juniper & Model 3 Highland — No-Drill
Protect your Tesla’s most vulnerable bumper corners with genuine carbon fiber. Installs in minutes with pre-applied 3M tape and factory mounting points—no drilling, no cutting, no bumper removal.
- Real Carbon Fiber: Glossy or Matte, UV-resistant finish.
- No-Drill Install: Pre-applied 3M tape + factory mounting points and included screws.
- Curb-Rash Protection: Guards expensive painted corners from parking scrapes.
- Lease-Friendly: Reversible exterior upgrade—no permanent modification.
Will It Fit My Tesla?
| Model | Year | Fitment |
|---|---|---|
| Model Y Juniper Premium | 2025+ | Fits |
| Model YL | 2026+ | Fits |
| Model 3 Highland | 2024+ | Fits |
| Model 3 Performance | 2025+ | Fits |
| Model Y Performance | 2025+ | Fits |
| Model Y (pre-2025) | 2020–2024 | Does NOT fit |
| Model 3 (pre-2024) | 2017–2023 | Does NOT fit |
Not sure? Send us your model and year—we’ll confirm fitment before you buy.
Before & After
Glossy vs Matte Carbon Fiber
Why Tesla Owners Choose This Trim
Protect Your Investment
Front bumper corners are some of the first areas to get scraped. This trim adds a protective layer over expensive painted corners.
Genuine Carbon Fiber
Real carbon fiber—not a flat vinyl or hydro-dipped plastic overlay. Available in Glossy or Matte.
No Drilling Into Your Tesla
Uses factory plastic mounting points and included screws. No cutting, no bumper removal, no permanent modification.
Lease-Friendly Upgrade
A reversible exterior mod for leased or financed Teslas. Install it, enjoy it, and remove it if needed.
Easy No-Drill Installation
Pre-applied 3M tape. No drilling. No cutting. No bumper removal.
- Clean and dry the front bumper corner area.
- Peel the pre-applied 3M tape backing and align the trim to the bumper corner.
- Press firmly along the trim to set the adhesive.
- Align the trim holes with the factory mounting points.
- Secure with the included screws. No drilling is required—the screws fasten into the factory plastic mounting area.
What’s in the Box
| Quantity | Item |
|---|---|
| 2 | Front Bumper Corner Trim Pieces (Left + Right) with Pre-Applied 3M Tape |
| 8 | Mounting Screws |
Specifications
| Material | Real Carbon Fiber |
|---|---|
| Finish | Glossy Carbon Fiber or Matte Carbon Fiber |
| Fitment | Model Y Juniper Premium 2025+, Model YL 2026+, Model 3 Highland 2024+, Model 3 Performance 2025+, Model Y Performance 2025+ |
| Installation | Pre-applied 3M tape + factory mounting points; no drilling required |
| Included | 2x trim with pre-applied 3M tape, 8x screws |
Real Carbon Fiber vs. Cheap Imitations
| Feature | Our Real Carbon Fiber | ABS Hydro-Dipped | OEM Black Plastic |
|---|---|---|---|
| Material | Real carbon fiber | ABS plastic | ABS plastic |
| Finish | Glossy or matte clear finish | Printed/hydro-dipped pattern | Textured matte |
| UV Resistance | High | Varies | Good |
| Weight | Light | Moderate | Moderate |
| Fitment | Model-specific | Often universal | OEM |
| Installation | Pre-applied 3M tape + included screws | Tape only | Clips/replacement |
| Price | Mid-premium | Low | High |
Frequently Asked Questions
Will this fit my Tesla?
It fits 2025+ Model Y Juniper Premium, 2026+ Model YL, 2024+ Model 3 Highland, 2025+ Model 3 Performance, and 2025+ Model Y Performance. It does NOT fit pre-2025 Model Y or pre-2024 Model 3.
Do I need to drill holes in my car?
No. The trim comes with pre-applied 3M tape and uses the factory mounting area. The included screws secure into the existing plastic mounting points—no drilling into your Tesla is required.
Is this real carbon fiber?
Yes. This front bumper corner trim is made from real carbon fiber and is available in glossy or matte finish.
Should I choose Glossy or Matte?
Choose Glossy for a deeper wet look that matches Tesla carbon spoilers and gloss trim. Choose Matte for a subtle OEM+ look that pairs well with matte black trim.
Will it protect against curb rash?
It adds a protective layer over the front bumper corners, helping reduce the risk of scrapes and scuffs. It is not a substitute for careful driving or full bumper protection.
How long does installation take?
Most owners can complete the install in 15–20 minutes with basic hand tools. Clean the surface first, align carefully, press firmly, and secure the screws.
Will it stay on in a car wash?
For best adhesion, avoid high-pressure washing for 24 hours after installation. After that, normal car washing is fine.
Does it block cameras or parking sensors?
It mounts to the front bumper corner area. If your Tesla has a front bumper camera or parking sensors, contact us with your model and year so we can confirm clearance.
How do I remove it without damaging paint?
Use mild heat and dental floss or fishing line to carefully separate the tape. Clean any residue with automotive adhesive remover. Take your time to protect the paint.
重要なお知らせ:
取り付け後に問題が発生した場合は、製品を取り外す前に必ずご連絡ください。
車両の詳細(モデル/年式/VIN)と写真や短い動画を提供していただくと、問題解決がより迅速になります。
トラブルシューティング前に製品を取り外したり改造した場合、返品や交換の対象外となることがあります。
TESERY返品ポリシー
安心して快適にお買い物いただけるよう努めています。商品を返品する必要がある場合は、明確で便利な返品サービスをご利用いただけます。
1.注文のキャンセル
-
発送前であれば、ご注文のキャンセルをリクエストできます。
-
ご注文の商品がすでに発送されている場合、配送を止められるよう最善を尽くしますが、成功を保証するものではありません。
-
キャンセルリクエストは、メールまたはオンラインカスタマーサービスから送信してください。
2. 30日間返品ポリシー
商品を受け取った日から30日以内であれば、返品をリクエストできます。手続きを円滑に進めるため、この30日以内に当社へ連絡し、返品を開始してください。
3. 返品の適用条件
返金を受けるには、返品商品が以下の条件を満たしている必要があります:
-
商品は、お受け取り時と同じ状態である必要があります。未着用・未使用で、タグが付いており、元の梱包材に入っていることが条件です。
-
購入証明が必要です。
4. 返品理由と関連手数料
返品には次の2種類があります:
-
品質上の問題または破損した商品:
-
お受け取りになった商品に欠陥や破損がある場合、または注文と異なる商品が届いた場合は、直ちにご連絡ください。全額返金または交換品の提供を行い、関連する費用はすべて当社が負担します。
-
-
品質に関係しない返品(例:個人的な都合):
-
個人的な都合(例:気が変わった、色やスタイルに不満がある)による返品の場合、15%の再入庫手数料が適用され、返品送料はお客様のご負担となります。
-
5. 返品手続き
返品を開始するには、以下の手順に従ってください:
-
お問い合わせ:
-
メールを送信する
support@tesery.com/ service@tesery.com または、ライブチャットを利用して返品リクエストをお知らせください。
-
-
手順を受け取る:
-
返品リクエストが承認されると、配送先住所や梱包ガイドラインなど、返品に関する詳しい手順をお送りします。
-
-
商品を返送する:
-
提供された手順に従って商品をご返送ください。事前に返品を申請せずに返送された商品は受け付けられませんのでご注意ください。
-
6. 返品不可の商品
商品の性質上、返品対象外となる商品があります。
-
カスタマイズ製品:ステアリングホイールやホイールなど、カスタム製品であることが明記されている商品は、品質に関係しない問題を理由とした返品はできません。
-
特定の商品:ギフトカード、危険物、可燃性の液体/ガスなどが含まれます。
特定の商品が返品対象となるかご不明な場合は、ご購入前にお問い合わせください。
7. 返金と交換
-
返金:
-
返品された商品を受け取り、検品が完了しましたら、返金が承認されたかどうかをお知らせします。承認された返金は、1~5営業日以内に元のお支払い方法へ自動的に処理されます。 最終的な入金時期は、ご利用の銀行またはクレジットカード会社によって異なります。
-
-
交換:
-
ご希望の商品を最も早く確実に入手するには、お手元の商品を返品し、返品が受理された後に新しい商品を別途ご購入いただくことをおすすめします。
-
8. アフターセールスサポートの要件
公平かつ効率的に問題を解決するため、アフターセールスサポートを依頼する際は、以下を含む必要な情報(これらに限りません)をご提供いただく必要があります。
- 車両情報(モデル、年式、VIN)
- 問題の明確な説明
- 問題を示す写真および/または短い動画
ご注意ください:
必要な情報をご提供いただけない場合、問題を正確に診断できず、返品、返金、または交換の処理に遅延が生じたり、処理できない場合があります。
事前の連絡なく製品が取り付け、改造、または取り外しされた場合、製品の状態を確認できないときは、TESERYは返品リクエストをお断りする権利を有します。