The Subtle Upgrade That Makes a Huge Difference
Tesla ownership is more than just driving an electric vehicle; it’s an experience. From the silent, instant acceleration to the minimalist, tech-forward interior, every detail is designed to feel like the future. As owners, we often look for ways to personalize this experience, to add a touch of our own style without compromising the car's sleek design. While there are countless accessories on the market, few offer the blend of elegance, simplicity, and 'wow' factor as a high-quality puddle light upgrade.
These small, often overlooked lights on the underside of your doors are prime real estate for a significant aesthetic enhancement. Today, we’re diving deep into one of the best options available: the Tesery Projection Lights for Model Y and Model 3. This isn’t just about adding a logo to the ground; it’s about elevating the moment you enter and exit your vehicle, turning a mundane action into a premium welcome. In this guide, we'll walk you through a hands-on review and a step-by-step installation that anyone can complete in minutes.
A Closer Look: Why Tesery's Projection Lights Stand Out
Not all puddle lights are created equal. The market is flooded with options, but the difference in quality becomes apparent the moment you open the box and, more importantly, when you see the projection at night. Tesery has focused on creating a product that feels like an OEM+ upgrade, not a cheap aftermarket add-on.
Unboxing and Build Quality
Upon unboxing, the Tesery modules immediately inspire confidence. They are compact, housed in durable black plastic that perfectly matches the texture of the Tesla's under-door trim. This ensures a seamless, factory-installed look. The lens is crystal clear, a critical component for achieving a sharp projection. The wiring harness is robust, featuring high-quality red and black wires leading to a connector that is an exact match for Tesla's factory plug. There's no need for splicing, soldering, or adapters—this is true plug-and-play.
The Projection: Clarity is Key
The single most important feature of a projection light is the image it produces. Tesery's lights project a stunningly crisp and bright 'TESLA' wordmark onto the ground. The light is a clean, brilliant white, providing excellent visibility and a touch of modern luxury. Unlike inferior models that can produce blurry edges or a dim, yellowish light, the Tesery projection is sharp from edge to edge. This level of clarity creates a virtual 'welcome mat' of light, enhancing both style and safety by illuminating the ground beneath the door.
Thoughtful Design for a Flawless Install
Tesery’s attention to detail is evident in the design. The modules are clearly marked with 'L' and 'R' for the left and right sides of the vehicle. This small but crucial detail prevents the common mistake of installing the lights upside down, saving you the frustration of having to pry them out and start over. The entire unit is engineered to click securely into the factory slot, ensuring it won't rattle or come loose over time.
Your 5-Minute DIY Installation Guide
One of the most appealing aspects of this upgrade is its simplicity. You don't need to be a professional mechanic or have a garage full of tools. As demonstrated in the video, the entire process for all four doors can take less than 20 minutes.
What You'll Need
- A small flathead screwdriver or a plastic pry tool (recommended to prevent any chance of scratching).
- That's it. The kit is all-inclusive.
Step-by-Step Instructions
Step 1: Locate and Remove the Original Light
Open your Tesla's door and look at the flat panel on the underside. You will see the small, rectangular OEM puddle light. Gently insert your flathead screwdriver or pry tool into the small gap on one of the edges and carefully pry downwards. The light is held in by clips and will pop out with minimal force.
Step 2: Disconnect the Power
Once the light is hanging by its wire, you'll see a small power connector. There's a small tab on the clip; press it down and pull to disconnect the original light module. Set the old light aside.
Important Note: When you disconnect the light, the car's computer may think the door is closed and, on frameless doors like the Model 3/Y, the window might roll up slightly. This is normal. Do not be alarmed, and avoid closing the door until the new light is connected.
Step 3: Connect and Test the Tesery Projector
Take your new Tesery projection light (making sure to use the correct 'L' or 'R' module for the corresponding door). Plug the connector directly into the car's wiring harness. It will only fit one way. Before you snap the module into place, let it hang and aim it at the ground. This allows you to verify that the 'TESLA' logo is oriented correctly. If it's upside down, simply unplug it, rotate it 180 degrees, and plug it back in.
Step 4: Secure the New Light
Once you've confirmed the correct orientation, gently guide the wires back into the opening and push the new projector module into the slot. It will snap into place with a satisfying, audible click, confirming it is securely mounted.
Step 5: Repeat for the Other Doors
Simply repeat this quick and easy process for the remaining doors. The process is identical for each one.
The Final Result: A Stunning Nighttime Transformation
The true magic of this upgrade is revealed after sunset. Opening your door in a dimly lit garage or dark street is transformed into a special event. The ground is bathed in a bright, clear projection that not only looks incredible but also enhances safety. You can easily spot puddles, curbs, or other obstacles, making entry and exit safer for you and your passengers. It’s a feature often found on high-end luxury vehicles, and it perfectly complements the futuristic aesthetic of a Tesla, especially if you have other custom lighting like the ambient strips seen in the video.
The Verdict: A Brilliant Upgrade for Any Tesla Owner
In the world of automotive accessories, it's rare to find a product that offers such a high return on investment in terms of aesthetic impact and ease of installation. The Tesery Projection Lights for Model Y and Model 3 are a resounding success. They deliver a premium, high-definition look, are built to last, and can be installed by anyone in minutes with a single tool.
If you're looking for a simple, cost-effective way to personalize your Tesla and add a touch of everyday luxury, this is the upgrade for you. It's an enhancement you and your passengers will appreciate every single time you open the door.
Ready to elevate your Tesla's welcome? Grab your set of Tesery Projection Lights today and use the discount code GSG JORO at checkout for a special offer!
