Black side repeater camera and turn-signal assembly shown installed in a white fender and separately below.
Side repeater position on a white Tesla front fender with an enlarged inset of the black assembly.
Top-view car diagram defining the vehicle's left and right sides while facing forward, with matching camera assemblies.
Repeater assembly details identifying the integrated camera lens, turn-signal light bar and rear connector.
Camera replacement checklist covering correct-side fitment, the required reset, signal checks and calibration driving.
Front and rear repeater views showing the camera lens, signal light, connector body, mounting housing and locating tabs.
Black side repeater assembly beside a caption identifying the camera, turn signal and housing as one replacement.
Vehicle-side diagram marking Left LH and Right RH and stating that each option includes one assembly.
Pre-order camera checklist covering fitment, side selection, installed-label comparison and support.
Single black triangular side repeater camera assembly with a narrow signal-light strip on white.
Black side repeater camera and turn-signal assembly shown installed in a white fender and separately below.
Side repeater position on a white Tesla front fender with an enlarged inset of the black assembly.
Top-view car diagram defining the vehicle's left and right sides while facing forward, with matching camera assemblies.
Repeater assembly details identifying the integrated camera lens, turn-signal light bar and rear connector.
Camera replacement checklist covering correct-side fitment, the required reset, signal checks and calibration driving.
Front and rear repeater views showing the camera lens, signal light, connector body, mounting housing and locating tabs.
Black side repeater assembly beside a caption identifying the camera, turn signal and housing as one replacement.
Vehicle-side diagram marking Left LH and Right RH and stating that each option includes one assembly.
Pre-order camera checklist covering fitment, side selection, installed-label comparison and support.
Single black triangular side repeater camera assembly with a narrow signal-light strip on white.

OEM Side Repeater Camera for Tesla Model 3 / Y (HW3.0)

★★★★★ (5)
Precio regular €120,95 EUR
Precio de venta €120,95 EUR Precio regular
Precio unitario
Ahorre
%3Cp%3EGana%20[points_amount]%20cuando%20compres%20este%20art%C3%ADculo.%3C/p%3E
Opciones de pago
  • Visa
  • Mastercard
  • American Express
  • Shop Pay
  • Apple Pay
  • Google Pay
  • Amazon
  • Discover
  • Diners Club
  • Bancontact
  • iDEAL Wero
  • USDC
  • AliPay
  • Bizum
  • MB WAY
  • Satispay
Hacer una pregunta

Hacer una pregunta

* Campos requeridos

Guia de tallas Compartir
Compre con confianza
  • Envío gratuito en pedidos superiores a $149

    Entrega estimada ·12 de Nov – 16 de Nov

  • Devoluciones y cambios gratuitos durante 30 días

  • Protección de Precio por 30 Días

    Devolvemos la diferencia de precio.

  • Soporte al cliente de por vida

    Ayuda personalizada con el producto.

    Contáctenos
Black side repeater camera and turn-signal assembly shown installed in a white fender and separately below.

OEM Side Repeater Camera for Tesla Model 3 / Y (HW3.0)

Descripción del Producto
Envío y devolución

TESERY · MODEL 3/Y REPLACEMENT PARTS

Restore the side view your Tesla relies on.

Replace a failed HW3.0 side repeater camera and turn-signal assembly with a complete, side-specific OEM replacement.

Black HW3.0 side repeater camera with a clear signal-light strip on a white background.

YOUR FIT. ALREADY NARROWED DOWN.

For Model 3 and Model Y with HW3.0.

Confirm the vehicle, year range and camera hardware first. Then choose the manufacturing factory and the side that needs replacement.

Your vehicle What to choose
Tesla Model 3 (2020–2023) · HW3.0 Left Side or Right Side.
Tesla Model 3 (2019.4–2023.9) · HW3.0 Left Side or Right Side.
Tesla Model Y (2020–2023) · HW3.0 Left Side or Right Side.
Tesla Model Y (2022–2024.4) · HW3.0 Left Side or Right Side.
HW4 / AI4 camera hardware Do not order this assembly.
2024+ Model 3 Highland Not compatible. Choose a Highland-specific camera.
Previously repaired or converted vehicle Match the installed label, connector and housing before ordering.

This is a like-for-like HW3.0 replacement—not an HW4/AI4 upgrade.

ONE CLEAR SELECTION

Which side needs replacing?

View left and right from inside the car while facing forward. Steering-wheel position does not change the vehicle side.

Forward-facing vehicle diagram with separate left and right side repeater camera assemblies beside their fender positions.

LEFT SIDE · 1 PIECE

The vehicle's left fender.

Driver's side on a left-hand-drive car; passenger's side on a right-hand-drive car.

OE reference: 1495864-20-E

RIGHT SIDE · 1 PIECE

The vehicle's right fender.

Passenger's side on a left-hand-drive car; driver's side on a right-hand-drive car.

OE reference: 1495865-20-E

Front and rear views of a side repeater camera assembly, identifying the lens, signal strip, connector and mounting features.

ONE COMPLETE ASSEMBLY

Camera. Signal. Housing.

The camera, side turn-signal light, connector body and mounting housing arrive together as one side-specific replacement assembly.

Vehicle wiring, installation tools and calibration service are not included.

KEEP THE REPAIR FOCUSED

Replace the failed assembly. Nothing more.

Match the installed hardware.

Use the year range as the first check. If repair history is uncertain, compare the existing label, connector and housing.

Order only what you need.

Choose Left Side for a left-fender failure, or Right Side when the right assembly needs replacement.

A black camera feed or warning can also come from wiring or another system fault. Have the failed component diagnosed before installation.

PLAN THE INSTALLATION

Fit. Reset. Recalibrate.

Have a Tesla-experienced technician complete the repair and applicable software checks.

01

Fit the correct side.

Protect the paint, remove the existing repeater, connect the replacement and secure the mounting points.

02

Reset and clear calibration.

Follow Tesla's applicable side repeater replacement procedure, including the DAS reset and camera calibration steps.

03

Check the view and signal.

Verify the camera feed, turn signal and physical fit before relying on the affected driver-assistance features.

Camera self-calibration can require up to 100 miles (160 km), depending on road and driving conditions.

WHY BUY FROM TESERY

The right details. Before you order.

A choice you can understand.

Defined years, HW3.0 fitment and plain-language side options reduce ordering mistakes.

Support that starts with your car.

If hardware has been changed, share a photo of the existing assembly and label through TESERY store chat before ordering.

Review the TESERY shipping policy and return policy for your destination and order.

BEFORE YOU ORDER

Questions, answered.

Is this the complete camera assembly or only a cover?

It is a complete side-specific assembly with the camera, turn-signal light, connector body and housing. It is not a cosmetic cover.

Does it fit my Model 3?

It fits Tesla Model 3 (2020–2023) and Model 3 (2019.4–2023.9) using HW3.0 side repeater hardware. It is not for Model 3 Highland or HW4/AI4 hardware.

Does it fit my Model Y?

It fits Tesla Model Y (2020–2023) and Model Y (2022–2024.4) using HW3.0 side repeater hardware. Match previously converted vehicles by their installed part.

How do I choose left or right?

Face forward from inside the car. Left is the vehicle's left fender; right is the vehicle's right fender.

Is calibration needed after installation?

Plan for the applicable DAS reset, camera calibration and functional checks. Self-calibration may require up to 100 miles (160 km).

Is this an HW4/AI4 upgrade?

No. It is a like-for-like HW3.0 replacement and does not convert the vehicle to newer camera hardware.

MADE SIMPLE

Your model. Your year. Your side.

Choose Left Side or Right Side—then plan installation and calibration with your technician.

Aviso importante:

Si tiene algún problema después de la instalación, póngase en contacto con nosotros antes de retirar el producto.

Proporcionar los detalles del vehículo (modelo/año/VIN) junto con fotos o vídeos cortos nos ayudará a resolver su problema mucho más rápido.

Los productos que se retiran o modifican antes de la resolución de problemas pueden no ser elegibles para devolución o reemplazo.

Nuestra política de devoluciones

Priorizamos su satisfacción y nos esforzamos por hacer que su experiencia de compra con nosotros sea agradable y libre de riesgos. Entendemos que es posible que necesite devolver un producto de vez en cuando. En ese caso, ofrecemos una política de devolución sencilla de 30 días a partir de la fecha en que recibe su artículo, sin costos de devolución.

Elegibilidad de devolución Los productos deben estar en las mismas condiciones que cuando se reciben: sin usar, sin usar, con etiquetas y en el embalaje original. Se requiere prueba de compra. Tenga en cuenta que los volantes y las ruedas son productos personalizados y solo pueden devolverse debido a problemas de calidad.

Iniciando un retorno Para iniciar una devolución, póngase en contacto con nosotros en Support@tesery.com O usar nuestro chat en vivo. Una vez que se apruebe su devolución, le enviaremos instrucciones sobre cómo devolver su paquete. Estamos encantados de cubrir los gastos de envío de devolución de todos los productos no defectuosos o no dañados. Los artículos dañados o defectuosos, por supuesto, también serán aceptados para su devolución.

(El comprador deberá pagar los costos de envío de devolución para las solicitudes de reembolso que surjan de un cambio temporal en los deseos del comprador).

Recuerde que no se pueden aceptar los artículos que se nos envían sin antes solicitar una devolución. Para cualquier consulta sobre devoluciones, póngase en contacto con nosotros en support@tesery.com.

Daños y problemas Le recomendamos que inspeccione su pedido al recibirlo. Si el artículo está defectuoso, dañado o si recibió el artículo incorrecto, póngase en contacto con nosotros inmediatamente para que podamos evaluar el problema y hacerlo bien. Su satisfacción al 100% es nuestro objetivo.

Excepciones Ciertos tipos de artículos no se pueden devolver, como productos personalizados, materiales peligrosos, líquidos inflamables o gases. Lamentablemente, tampoco podemos aceptar devoluciones en tarjetas de regalo. Si tiene consultas sobre su artículo específico, no dude en ponerse en contacto con nosotros.

Intercambios Para asegurarse de obtener lo que desea lo más rápido posible, le recomendamos que devuelva el artículo y realice un nuevo pedido una vez que se acepte la devolución.

Reembolsos Una vez que recibamos e inspeccionemos su artículo devuelto, le notificaremos y le informaremos si el reembolso ha sido aprobado. Los reembolsos aprobados se procesarán automáticamente a su método de pago original dentro de 3-5 días hábiles. Tenga en cuenta que su banco o compañía de tarjeta de crédito puede tardar algún tiempo adicional en enviar el reembolso a su cuenta.

Nota Para acelerar el proceso de devolución, envíe a través de EMS y declare el paquete como una muestra de prueba con un valor inferior a 0. Evite DHL/Fedex/UPS, ya que estos servicios pueden incurrir en detenciones aduaneras, altos impuestos y posibles problemas de entrega. Las pérdidas incurridas al seleccionar estos servicios expresos para su devolución serán sufragadas por el remitente.


Su satisfacción es primordial para nosotros. Siempre estamos aquí para ayudar y hacer que su regreso sea lo más fácil posible. ¡Gracias por elegir comprar con nosotros!

★★★★★
★★★★★
★★★★★
★★★★★