The vehicle's left fender.
Driver's side on a left-hand-drive car; passenger's side on a right-hand-drive car.
OE reference: 1820734-00-D
Envío gratuito en pedidos superiores a $149
Devoluciones y cambios gratuitos durante 30 días
Protección de Precio por 30 Días
Soporte al cliente de por vida
Contáctenos
Side Repeater Camera for Tesla Model 3 Highland (HW4.0)
TESERY · HW4 replacement parts
Replace a failed side repeater camera and turn-signal assembly on your refreshed Model 3 or Model Y. Choose the vehicle's left or right side—without decoding the part yourself.
Your fit. Already narrowed down.
This replacement is intended for the newer side repeater camera hardware fitted to the refreshed vehicles below.
| Your vehicle | What to choose |
|---|---|
| Model 3 2023.10+ (3.0 Version Camera) | Choose Left Side or Right Side in this listing. |
| Model 3 Highland 2024+ (3.0 Version Camera) | Choose Left Side or Right Side in this listing. |
| Model Y 2023+ (3.0 Version Camera) | Choose Left Side or Right Side in this listing. |
| Model Y 2024+ (3.0 Version Camera) | Choose Left Side or Right Side in this listing. |
| Model Y 2024.5–2024.12 (3.0 Version Camera) | Choose Left Side or Right Side in this listing. |
| Model Y Juniper 2025+ (3.0 Version Camera) | Choose Left Side or Right Side in this listing. |
Model year alone can be unreliable near production changes. If the car sits near a refresh boundary, the label on the removed assembly is the best confirmation.
One simple choice
Left and right are always viewed from inside the car, facing forward. Steering-wheel position does not change the vehicle side.

Driver's side on a left-hand-drive car; passenger's side on a right-hand-drive car.
OE reference: 1820734-00-D
Passenger's side on a left-hand-drive car; driver's side on a right-hand-drive car.
OE reference: 1820735-00-D
Each selection supplies one assembly. To replace both sides, add one Left Side and one Right Side to the cart.
One complete assembly
The side camera, turn-signal light and molded outer housing come together as one replacement unit, with mounting features shaped for the existing fender opening.
Use it for a diagnosed failed camera, damaged repeater lens or broken housing. The vehicle wiring harness and installation tools are not included.
Keep the repair focused
One selected side assembly, supplied as the camera, turn-signal light and molded housing shown. Order one of each side only if the repair requires both.
1820734-00-D identifies the left application; 1820735-00-D identifies the right. Minor revision suffixes can change over time.
Use this part for a diagnosed failed camera, damaged signal strip or broken housing. A black camera feed or warning can also come from the connector, wiring or software. This replacement does not add HW4/AI4 capability or unlock Autopilot/FSD features.
Plan the installation
Have a Tesla-experienced technician complete the repair and the applicable software checks. The job includes protecting the paint, replacing the correct side, reconnecting the camera and lamp wiring, checking the view and signal, and completing the required reset and calibration procedure.
Remove the failed unit and seat the replacement securely in the fender opening.
Confirm the camera feed, turn signal and connector security before closing the repair.
Follow the vehicle-specific service procedure and complete the required manual-driving calibration before relying on affected driver-assistance features.
Calibration distance varies with road markings and conditions. Tesla notes that camera self-calibration can require up to 100 miles (160 km). Refer to Tesla's current service information for your exact model and region.
Why buy from TESERY
Left and right options are named from the vehicle's point of view, with the relevant OE references shown beside each choice.
If your vehicle sits near a hardware change, send the vehicle year and a photo of the existing label through TESERY store chat. We will help confirm the application before purchase.
Keep your fitment details, order and after-sales support together with TESERY. Review our shipping policy and return policy for your destination and order.
Before you order
It is the complete side repeater camera, turn-signal and molded housing assembly shown. It is not a decorative overlay.
Yes, for the refreshed Model 3 application with HW4/AI4 side repeater hardware. Choose the vehicle's left or right side.
Yes, for the Juniper refresh application with the matching side-camera hardware. For a pre-Juniper Model Y, send TESERY a photo of the removed part label and connector before ordering.
Yes, for those Model Y applications with 3.0 Version Camera hardware. If your vehicle sits near a production change, send TESERY a photo of the existing part label to confirm compatibility.
Only on a left-hand-drive vehicle. On a right-hand-drive vehicle, the vehicle's left side is the passenger side. Imagine sitting in the car and looking forward.
No. Left Side and Right Side each supply one assembly. To replace both sides, add one of each to the cart.
No. It is a new aftermarket replacement supplied by TESERY. The OE reference numbers identify the replacement application.
Yes. Plan for the applicable DAS reset and camera calibration procedure after installation, followed by the required manual-driving self-calibration.
No. The camera replaces compatible existing HW4/AI4 side repeater hardware. It does not convert legacy camera architecture or unlock software features.
Made simple
Select Left Side or Right Side—and send TESERY the current part label if your vehicle sits near a production change.
Aviso importante:
Si tiene algún problema después de la instalación, póngase en contacto con nosotros antes de retirar el producto.
Proporcionar los detalles del vehículo (modelo/año/VIN) junto con fotos o vídeos cortos nos ayudará a resolver su problema mucho más rápido.
Los productos que se retiran o modifican antes de la resolución de problemas pueden no ser elegibles para devolución o reemplazo.
Nuestra política de devoluciones
Priorizamos su satisfacción y nos esforzamos por hacer que su experiencia de compra con nosotros sea agradable y libre de riesgos. Entendemos que es posible que necesite devolver un producto de vez en cuando. En ese caso, ofrecemos una política de devolución sencilla de 30 días a partir de la fecha en que recibe su artículo, sin costos de devolución.
Elegibilidad de devolución Los productos deben estar en las mismas condiciones que cuando se reciben: sin usar, sin usar, con etiquetas y en el embalaje original. Se requiere prueba de compra. Tenga en cuenta que los volantes y las ruedas son productos personalizados y solo pueden devolverse debido a problemas de calidad.
Iniciando un retorno Para iniciar una devolución, póngase en contacto con nosotros en Support@tesery.com O usar nuestro chat en vivo. Una vez que se apruebe su devolución, le enviaremos instrucciones sobre cómo devolver su paquete. Estamos encantados de cubrir los gastos de envío de devolución de todos los productos no defectuosos o no dañados. Los artículos dañados o defectuosos, por supuesto, también serán aceptados para su devolución.
(El comprador deberá pagar los costos de envío de devolución para las solicitudes de reembolso que surjan de un cambio temporal en los deseos del comprador).
Recuerde que no se pueden aceptar los artículos que se nos envían sin antes solicitar una devolución. Para cualquier consulta sobre devoluciones, póngase en contacto con nosotros en support@tesery.com.
Daños y problemas Le recomendamos que inspeccione su pedido al recibirlo. Si el artículo está defectuoso, dañado o si recibió el artículo incorrecto, póngase en contacto con nosotros inmediatamente para que podamos evaluar el problema y hacerlo bien. Su satisfacción al 100% es nuestro objetivo.
Excepciones Ciertos tipos de artículos no se pueden devolver, como productos personalizados, materiales peligrosos, líquidos inflamables o gases. Lamentablemente, tampoco podemos aceptar devoluciones en tarjetas de regalo. Si tiene consultas sobre su artículo específico, no dude en ponerse en contacto con nosotros.
Intercambios Para asegurarse de obtener lo que desea lo más rápido posible, le recomendamos que devuelva el artículo y realice un nuevo pedido una vez que se acepte la devolución.
Reembolsos Una vez que recibamos e inspeccionemos su artículo devuelto, le notificaremos y le informaremos si el reembolso ha sido aprobado. Los reembolsos aprobados se procesarán automáticamente a su método de pago original dentro de 3-5 días hábiles. Tenga en cuenta que su banco o compañía de tarjeta de crédito puede tardar algún tiempo adicional en enviar el reembolso a su cuenta.
Nota Para acelerar el proceso de devolución, envíe a través de EMS y declare el paquete como una muestra de prueba con un valor inferior a 0. Evite DHL/Fedex/UPS, ya que estos servicios pueden incurrir en detenciones aduaneras, altos impuestos y posibles problemas de entrega. Las pérdidas incurridas al seleccionar estos servicios expresos para su devolución serán sufragadas por el remitente.
Su satisfacción es primordial para nosotros. Siempre estamos aquí para ayudar y hacer que su regreso sea lo más fácil posible. ¡Gracias por elegir comprar con nosotros!