Tesla Model X Spoiler Front Lip - Rear Molded Carbon Fiber
Tesla Model X Spoiler Front Lip can make the vehicle look like a higher performance car, it adds more downforce, helps with aerodynamics, and significantly improves styling and appearance. It also protects the front bumper to some extent.
The front lip of the Tesery Model X is made of real carbon fiber, a hand laid woven carbon fiber without fiberglass or any other plastic. It goes all the way around the front of the car and ends at the wheel hatch.
This, combined with our rear diffuser, creates more down force on your Model X, making it more stable at higher speeds.
Material: Gloss Carbon Fiber
Fitment: Tesla Model X 2016-2022 (all years, models, and versions)
1pc × Model X Spoiler Front Lip
1pc × 3M double-sided adhesive tape
This front lip mounts directly to the lower front bumper with double-sided tape and self-tapping screws. The painted area on the bumper will not be damaged in any way as the screws will be secured to the unpainted black plastic under the bumper.
Once installed, the front lip must be taped in position with strong tape while bonding it to your paint. Be sure to tape the front lip to the bumper and leave it on for 72 hours. This is the recommended method for complete curing. The screws and rivets will help ensure that it never comes loose. If you hit a curb or bump into something, you must make sure the lip is safe to drive. If it ever comes loose or is not secured, you can use self-tapping screws to lock it to the bottom of the bumper.
Professional installation may be required as this is held in place with 3M VHB double sided tape or you can use liquid glue. This lip is mounted under the painted surface of the bumper.
If you already have a clear bra and PPF installed, it will mount directly over it. If you have any ceramic coating on the front end, you will need to wipe off the coating with a magic sponge to ensure a strong bond with the 3M double sided tape. If you ever try to remove the spoiler, it will likely crack, but if removed properly, your car's paint will not be damaged.
Carbon fiber patterns are guaranteed. Real molded carbon fiber is hand laid, not pre-preg wet-molded, so it may show imperfections in the pattern direction. These variations are normal and are not a manufacturer's defect. If you would like to return the product, please refer to our return policy.
UV Guarantee. Our authentic molded carbon fiber is coated with 3 layers of UV protection. Over time, this protection may wear off without proper waxing or care with the application of a nano-ceramic coating. The warranty period is 1 year. Slight yellowing is normal when Carbon Fiber is parked in direct sunlight and is not covered by our warranty. Finally, after your installation, we recommend wrapping it in a paint protection film with a clear bra. This will only work on shiny surfaces and will prevent pitting, scratching and denting over time.
Note: These are considered used as long as the double sided adhesive liner is removed. Used items are not returnable, so please make sure you are happy with the way it looks and place it on your Tesla before removing the adhesive pads.