Tesla Model Y Rear Diffuser Trunk Lip - Real Molded Carbon Fiber
Tesla Model Y rear diffuser adds a deeper and more aggressive look to the rear end of your car. It increases the rear downforce and makes it more stable at higher speeds. The Tesla Model Y diffuser trunk lip can enhance the car's sporty performance and make the car more dynamic.It is solid carbon fiber and it mounts securely to the lower part of your rear bumper.
Carbon fiber aerodynamic parts are made of extremely strong aerocraft high-grade carbon fiber material, which is lighter in weight and has high tensile strength, ensuring the long life you expect. It is real carbon fiber, no glass fiber or any other plastic of hand-woven carbon fiber.
This molded carbon fiber version is available in matte, or glossy carbon fiber.
Super high gloss clear gel coat finish and UV protection ensures the long life you expect.
The rear lip is installed with tape and self-tapping screws. Professional installation is highly recommended.
Material: Gloss/Matte Carbon Fiber
Fitment: Tesla Model Y 2020-2022 (all years, models, and versions)
1pc × Tesla Model Y Rear Diffuser
1pc × 3M double-sided adhesive tape
Model Y Rear Diffuser directly to the lower rear bumper with double-sided tape and self-tapping screws.
If you have a clear bra, paint protection film (PPF) installed, the diffuser will mount directly over it. If you have any ceramic coating on the front end, you will need to use a magic wipe sponge to remove the coating to ensure a strong bond with the 3M double sided tape.
Ground Clearance. Ground clearance is slightly reduced at the rear end. If you are careful when driving near curbs, speed bumps or driveways, lowering the springs or coil mounts will not cause your diffuser to be scratched.
After you install it, we recommend wrapping it with a clear bra paint protection film. This will only work on shiny versions and will prevent pitting, scratches and dents over time.
Carbon fiber patterns are guaranteed. True molded carbon fiber is hand laid, not pre-impregnated and wet molded, so defects may occur in the direction of the pattern. These variations are normal and are not a manufacturer's defect. If you would like to return a product, please refer to our return policy.
UV Guarantee. Our authentic molded carbon fiber is coated with 3 layers of UV protection. Over time, this protection may wear off without proper waxing or care with a nano-ceramic coating. The warranty period is 1 year. When carbon fiber is parked in direct sunlight, slight yellowing is normal and is not covered by our warranty. Finally, after installation, we recommend wrapping it in a paint protection film with a clear bra. This is only for glossy surfaces and will prevent pitting, scratching and denting over time.
Note: These are considered used as long as the double-sided adhesive lining is removed. Used items are not returnable, so make sure you are happy with the way it looks and place it on your Tesla before removing the adhesive liner.