The vehicle's left fender.
Driver's side on a left-hand-drive car; passenger's side on a right-hand-drive car.
OE reference: 1820734-00-D
Free Worldwide Shipping
Orders US$149+30-Day Returns & Exchanges
Policy details30-Day Price Protection
Lifetime Customer Support
Contact us
Side Repeater Camera for Tesla Model 3 Highland (HW4.0)
TESERY · HW4 replacement parts
Replace a failed side repeater camera and turn-signal assembly on your refreshed Model 3 or Model Y. Choose the vehicle's left or right side—without decoding the part yourself.
Your fit. Already narrowed down.
This replacement is intended for the newer side repeater camera hardware fitted to the refreshed vehicles below.
| Your vehicle | What to choose |
|---|---|
| Model 3 2023.10+ (3.0 Version Camera) | Choose Left Side or Right Side in this listing. |
| Model 3 Highland 2024+ (3.0 Version Camera) | Choose Left Side or Right Side in this listing. |
| Model Y 2023+ (3.0 Version Camera) | Choose Left Side or Right Side in this listing. |
| Model Y 2024+ (3.0 Version Camera) | Choose Left Side or Right Side in this listing. |
| Model Y 2024.5–2024.12 (3.0 Version Camera) | Choose Left Side or Right Side in this listing. |
| Model Y Juniper 2025+ (3.0 Version Camera) | Choose Left Side or Right Side in this listing. |
Model year alone can be unreliable near production changes. If the car sits near a refresh boundary, the label on the removed assembly is the best confirmation.
One simple choice
Left and right are always viewed from inside the car, facing forward. Steering-wheel position does not change the vehicle side.

Driver's side on a left-hand-drive car; passenger's side on a right-hand-drive car.
OE reference: 1820734-00-D
Passenger's side on a left-hand-drive car; driver's side on a right-hand-drive car.
OE reference: 1820735-00-D
Each selection supplies one assembly. To replace both sides, add one Left Side and one Right Side to the cart.
One complete assembly
The side camera, turn-signal light and molded outer housing come together as one replacement unit, with mounting features shaped for the existing fender opening.
Use it for a diagnosed failed camera, damaged repeater lens or broken housing. The vehicle wiring harness and installation tools are not included.
Keep the repair focused
One selected side assembly, supplied as the camera, turn-signal light and molded housing shown. Order one of each side only if the repair requires both.
1820734-00-D identifies the left application; 1820735-00-D identifies the right. Minor revision suffixes can change over time.
Use this part for a diagnosed failed camera, damaged signal strip or broken housing. A black camera feed or warning can also come from the connector, wiring or software. This replacement does not add HW4/AI4 capability or unlock Autopilot/FSD features.
Plan the installation
Have a Tesla-experienced technician complete the repair and the applicable software checks. The job includes protecting the paint, replacing the correct side, reconnecting the camera and lamp wiring, checking the view and signal, and completing the required reset and calibration procedure.
Remove the failed unit and seat the replacement securely in the fender opening.
Confirm the camera feed, turn signal and connector security before closing the repair.
Follow the vehicle-specific service procedure and complete the required manual-driving calibration before relying on affected driver-assistance features.
Calibration distance varies with road markings and conditions. Tesla notes that camera self-calibration can require up to 100 miles (160 km). Refer to Tesla's current service information for your exact model and region.
Why buy from TESERY
Left and right options are named from the vehicle's point of view, with the relevant OE references shown beside each choice.
If your vehicle sits near a hardware change, send the vehicle year and a photo of the existing label through TESERY store chat. We will help confirm the application before purchase.
Keep your fitment details, order and after-sales support together with TESERY. Review our shipping policy and return policy for your destination and order.
Before you order
It is the complete side repeater camera, turn-signal and molded housing assembly shown. It is not a decorative overlay.
Yes, for the refreshed Model 3 application with HW4/AI4 side repeater hardware. Choose the vehicle's left or right side.
Yes, for the Juniper refresh application with the matching side-camera hardware. For a pre-Juniper Model Y, send TESERY a photo of the removed part label and connector before ordering.
Yes, for those Model Y applications with 3.0 Version Camera hardware. If your vehicle sits near a production change, send TESERY a photo of the existing part label to confirm compatibility.
Only on a left-hand-drive vehicle. On a right-hand-drive vehicle, the vehicle's left side is the passenger side. Imagine sitting in the car and looking forward.
No. Left Side and Right Side each supply one assembly. To replace both sides, add one of each to the cart.
No. It is a new aftermarket replacement supplied by TESERY. The OE reference numbers identify the replacement application.
Yes. Plan for the applicable DAS reset and camera calibration procedure after installation, followed by the required manual-driving self-calibration.
No. The camera replaces compatible existing HW4/AI4 side repeater hardware. It does not convert legacy camera architecture or unlock software features.
Made simple
Select Left Side or Right Side—and send TESERY the current part label if your vehicle sits near a production change.
Important Notice:
If you encounter any issues after installation, please contact us before removing the product.
Providing vehicle details (model/year/VIN) along with photos or short videos will help us resolve your issue much faster.
Products that are removed or altered before troubleshooting may not be eligible for return or replacement.
TESERY Return Policy
We are committed to providing you with a worry-free and enjoyable shopping experience. Should you need to return a product, we offer a clear and convenient return service.
1.Order Cancellation
You can request to cancel your order before it has been shipped.
If your order has already been shipped, we will do our best to intercept it, but success is not guaranteed.
Please submit your cancellation request via email or through our online customer service.
2. 30-Day Return Policy
You have the right to request a return within 30 days from the date you receive your item. To ensure a smooth process, please make sure to contact us and initiate the return within this 30-day period.
3. Eligibility for Returns
To be eligible for a refund, returned products must meet the following conditions:
The item must be in the same condition as when you received it—unworn, unused, with tags, and in its original packaging.
Proof of purchase is required.
4. Return Reasons & Associated Fees
We handle two types of returns:
Quality Issues or Damaged Products:
If the item you received is defective, damaged, or if you received the wrong item, please contact us immediately. We will issue a full refund or provide a replacement and will cover all associated costs.
Non-Quality-Related Returns (e.g., Personal Preference):
For returns initiated due to personal preferences (e.g., change of mind, dissatisfaction with the color or style), a 15% restocking fee will be applied, and the customer is responsible for covering the return shipping costs.
5. The Return Process
To start a return, please follow these steps:
Contact Us:
Send an email to support@tesery.com / service@tesery.com or use our live chat to inform us of your return request.
Receive Instructions:
Once your return request is approved, we will send you detailed return instructions, including the shipping address and packing guidelines.
Ship the Item Back:
Please ship the item back according to the instructions provided. Please note that items sent back to us without first requesting a return will not be accepted.
6. Non-Returnable Items
Due to their nature, certain types of items are not eligible for return:
Customized Products: For example, steering wheels and wheels that are explicitly marked as custom products cannot be returned for non-quality-related issues.
Specific Items: This includes gift cards, hazardous materials, or flammable liquids/gases.
If you have any questions about the eligibility of a specific item, please contact us before making a purchase.
7. Refunds & Exchanges
Refunds:
Once we receive and inspect your returned item, we will notify you and inform you if the refund has been approved. Approved refunds will be processed automatically to your original payment method within 1-5 business days. The final credit posting time depends on your bank or credit card company.
Exchanges:
For the fastest way to ensure you get what you want, we recommend that you return the item you have, and once the return is accepted, make a separate purchase for the new item.
8. After-Sales Support Requirements
To ensure a fair and efficient resolution process, customers are required to provide necessary information when requesting after-sales support, including but not limited to:
- Vehicle details (model, year, VIN)
- Clear description of the issue
- Supporting photos and/or short videos demonstrating the problem
Please note:
Failure to provide the required information may prevent us from accurately diagnosing the issue and may result in delays or inability to process returns, refunds, or replacements.
For products that have been installed, modified, or removed without prior communication, TESERY reserves the right to decline return requests if the product condition cannot be verified.