Black automatic phone cradle on a short dashboard-mounted arm with side grips and lower support feet.
Round magnetic phone interface on a short support arm fitted along the dashboard vent area.
Black phone held upright by a side-grip cradle beside the dashboard and front pillar.
Highland and Juniper phone-holder graphic showing the clamp version above rotation and installation icons.
Comparison graphic showing the holder's movable support and vent clearance beside examples of other mounting styles.
Magnetic and clamp phone heads beside a support arm with a 17 mm ball joint and rotation arrows.
Wide cabin view showing several illustrated phone-holder positions, with smaller driver and passenger viewing-angle examples.
Cutaway-style illustration of the automatic clamp mechanism above automatic-clamping and touch-release diagrams.
Exploded illustration of the solar-assisted phone holder showing its top panel, coil and internal energy-storage components.
Magnetic phone holder with a green triangle marking the support points beside a general triangle-stability graphic.
Dashboard support arm shown with blue airflow lines beneath a vent-clearance heading.
Transparent and black mounting-base examples with ball heads positioned along the dashboard vent area.
Black automatic phone cradle on a short dashboard-mounted arm with side grips and lower support feet.
Round magnetic phone interface on a short support arm fitted along the dashboard vent area.
Black phone held upright by a side-grip cradle beside the dashboard and front pillar.
Highland and Juniper phone-holder graphic showing the clamp version above rotation and installation icons.
Comparison graphic showing the holder's movable support and vent clearance beside examples of other mounting styles.
Magnetic and clamp phone heads beside a support arm with a 17 mm ball joint and rotation arrows.
Wide cabin view showing several illustrated phone-holder positions, with smaller driver and passenger viewing-angle examples.
Cutaway-style illustration of the automatic clamp mechanism above automatic-clamping and touch-release diagrams.
Exploded illustration of the solar-assisted phone holder showing its top panel, coil and internal energy-storage components.
Magnetic phone holder with a green triangle marking the support points beside a general triangle-stability graphic.
Dashboard support arm shown with blue airflow lines beneath a vent-clearance heading.
Transparent and black mounting-base examples with ball heads positioned along the dashboard vent area.
Black automatic phone cradle on a short dashboard-mounted arm with side grips and lower support feet.
Round magnetic phone interface on a short support arm fitted along the dashboard vent area.
Black phone held upright by a side-grip cradle beside the dashboard and front pillar.
Highland and Juniper phone-holder graphic showing the clamp version above rotation and installation icons.
Comparison graphic showing the holder's movable support and vent clearance beside examples of other mounting styles.
Magnetic and clamp phone heads beside a support arm with a 17 mm ball joint and rotation arrows.
Wide cabin view showing several illustrated phone-holder positions, with smaller driver and passenger viewing-angle examples.
Cutaway-style illustration of the automatic clamp mechanism above automatic-clamping and touch-release diagrams.
Exploded illustration of the solar-assisted phone holder showing its top panel, coil and internal energy-storage components.
Magnetic phone holder with a green triangle marking the support points beside a general triangle-stability graphic.
Dashboard support arm shown with blue airflow lines beneath a vent-clearance heading.
Transparent and black mounting-base examples with ball heads positioned along the dashboard vent area.

Flexible Phone Holder for Model 3 Highland & Model Y Juniper | TESERY

★★★★★ (76)
Regular price £23.00 GBP
Sale price £23.00 GBP Regular price £27.00 GBP
Unit price
Save 15%
%3Cp%3EEarn%20[points_amount]%20when%20you%20buy%20this%20item.%3C/p%3E
Pay with Ease
  • Visa
  • Mastercard
  • American Express
  • Shop Pay
  • Apple Pay
  • Google Pay
  • Amazon
  • Discover
  • Diners Club
  • Bancontact
  • iDEAL Wero
  • USDC
  • AliPay
  • Bizum
  • MB WAY
  • Satispay
Ask a question

Ask a Question

* Required fields

 Size guide Share
Shop with confidence

  • Free Worldwide Shipping

    Orders US$149+

    Orders US$149+ ·Nov 13 – Nov 17

  • 30-Day Returns & Exchanges

    Policy details

  • 30-Day Price Protection

    We refund the price difference.

  • Lifetime Customer Support

    One-to-one product help.

    Contact us
Black automatic phone cradle on a short dashboard-mounted arm with side grips and lower support feet.

Flexible Phone Holder for Model 3 Highland & Model Y Juniper | TESERY

Product description
Shipping & Return

Highland · Juniper · Model YL

Put navigation near your sightline without giving up the center display.

A vehicle-specific support arm with an adjustable 17 mm ball head, offered with either a solar-assisted auto clamp or a passive magnetic phone interface.

  • 360° ball adjustment
  • Two holder styles
  • Black finish
  • Model-specific base
Installation illustration of a dark mounting base with a ball joint seated in a dashboard gap beside a translucent alignment guide.

Choose the phone interface

Solar Clip and Magnetic are different products—not just two names for the same head.

Solar Clip · Black

Auto-sensing clamp

Uses an internally powered clamp with solar-assisted energy storage for one-hand opening and closing.

  • Side-grip support for a wider phone range
  • Powered mechanism requires stored charge
  • Best when the solar area receives usable light
Magnetic · Black

Passive magnetic hold

Simpler placement with no motorized clamp. Holding strength depends on the phone, case and magnetic interface.

  • Fast portrait or landscape placement
  • No powered clamping mechanism
  • Use a compatible magnetic phone/case or ring
Charging is not the product’s primary function.

“Solar Clip” refers to supporting the clamp’s internal mechanism. Do not interpret the listing as a promise that it wirelessly charges the phone.

Exact live fitment

The base changes with the refreshed dashboard architecture.

Vehicle Fitment Selector choice
Model 3 Highland · 2024+ Compatible Select “Model 3 Highland 2024+”.
Model Y Juniper · 2025+ Compatible Select “Model Y Juniper 2025+ & Model YL 2026+”.
Model YL · 2026+ Compatible Uses the combined Juniper / Model YL choice.
Model 3 · 2017–2023 Not listed Earlier dashboard/screen surround is different.
Model Y · 2020–Feb. 2025 Not listed Pre-refresh dashboard is not included.
Phone held upright in a side-clamp holder mounted along the dashboard trim of a refreshed Tesla.

Adjust the arm, then lock the view

360° refers to the ball joint—not unlimited safe placement.

The 17 mm ball connection supports portrait/landscape rotation and angle adjustment. Set the phone where it can be glanced at without covering the road, the center display, vents, warning information or nearby controls.

Recheck after the first drives.

Phone weight, a thick case, rough roads and cabin heat can change joint tension or magnetic grip. Retighten and reposition before driving if anything moves.

Install without forcing trim

Dry-test the vehicle-specific base before loading a phone.

  1. Match the baseConfirm the selected vehicle label and compare the mounting profile with the dashboard/screen surround.
  2. Seat graduallyAlign the contact surfaces and apply even hand pressure. Do not lever, sharply bend or force interior trim.
  3. Load and testAttach the arm and holder, place the phone while parked, then check clearance through the full adjustment range.
Stop if the trim must deform.

If the base does not seat with controlled pressure, verify fitment and contact support before continuing.

Before you order

Phone-holder FAQ

Does it fit the older Model 3 or pre-refresh Model Y?

No option for those dashboards is listed. This product is for Model 3 Highland 2024+, Model Y Juniper 2025+ and Model YL 2026+.

Does Solar Clip charge my phone?

The solar-assisted feature supports the powered clamp mechanism; the listing should not be treated as a promise of phone charging.

Will every phone work with the Magnetic version?

Magnetic hold depends on the phone, case and compatible magnetic ring/interface. Thick or non-magnetic cases can reduce grip.

Can it block the center display or driving view?

Any holder can obstruct controls or sightlines if positioned poorly. Adjust while parked and confirm clear road view, display access and control clearance before driving.

What should I know about returns?

Dry-fit the base and confirm the chosen style before forcing trim or applying any included mounting material. Used, damaged or installed parts may not qualify; review the current refund policy.

Vehicle → holder style → viewing angle

Choose the dashboard generation first, then Solar Clip or Magnetic.

Choose your configuration

Important Notice:

If you encounter any issues after installation, please contact us before removing the product.

Providing vehicle details (model/year/VIN) along with photos or short videos will help us resolve your issue much faster.

Products that are removed or altered before troubleshooting may not be eligible for return or replacement.

TESERY Return Policy

We are committed to providing you with a worry-free and enjoyable shopping experience. Should you need to return a product, we offer a clear and convenient return service.

1.Order Cancellation

  • You can request to cancel your order before it has been shipped.

  • If your order has already been shipped, we will do our best to intercept it, but success is not guaranteed.

  • Please submit your cancellation request via email or through our online customer service.

2. 30-Day Return Policy

You have the right to request a return within 30 days from the date you receive your item. To ensure a smooth process, please make sure to contact us and initiate the return within this 30-day period.

3. Eligibility for Returns

To be eligible for a refund, returned products must meet the following conditions:

  • The item must be in the same condition as when you received it—unworn, unused, with tags, and in its original packaging.

  • Proof of purchase is required.

4. Return Reasons & Associated Fees

We handle two types of returns:

  • Quality Issues or Damaged Products:

    • If the item you received is defective, damaged, or if you received the wrong item, please contact us immediately. We will issue a full refund or provide a replacement and will cover all associated costs.

  • Non-Quality-Related Returns (e.g., Personal Preference):

    • For returns initiated due to personal preferences (e.g., change of mind, dissatisfaction with the color or style), a 15% restocking fee will be applied, and the customer is responsible for covering the return shipping costs.

5. The Return Process

To start a return, please follow these steps:

  1. Contact Us:

  2. Receive Instructions:

    • Once your return request is approved, we will send you detailed return instructions, including the shipping address and packing guidelines.

  3. Ship the Item Back:

    • Please ship the item back according to the instructions provided. Please note that items sent back to us without first requesting a return will not be accepted.

6. Non-Returnable Items

Due to their nature, certain types of items are not eligible for return:

  • Customized Products: For example, steering wheels and wheels that are explicitly marked as custom products cannot be returned for non-quality-related issues.

  • Specific Items: This includes gift cards, hazardous materials, or flammable liquids/gases.

If you have any questions about the eligibility of a specific item, please contact us before making a purchase.

7. Refunds & Exchanges

  • Refunds:

    • Once we receive and inspect your returned item, we will notify you and inform you if the refund has been approved. Approved refunds will be processed automatically to your original payment method within 1-5 business days. The final credit posting time depends on your bank or credit card company.

  • Exchanges:

    • For the fastest way to ensure you get what you want, we recommend that you return the item you have, and once the return is accepted, make a separate purchase for the new item.

8. After-Sales Support Requirements

To ensure a fair and efficient resolution process, customers are required to provide necessary information when requesting after-sales support, including but not limited to:

- Vehicle details (model, year, VIN)
- Clear description of the issue
- Supporting photos and/or short videos demonstrating the problem

Please note:

Failure to provide the required information may prevent us from accurately diagnosing the issue and may result in delays or inability to process returns, refunds, or replacements.

For products that have been installed, modified, or removed without prior communication, TESERY reserves the right to decline return requests if the product condition cannot be verified.

★★★★★
★★★★★
★★★★★
★★★★★