Tesla interior with soft blue footwell ambient lighting at dusk
White LED lighting illuminating a dark carpeted passenger footwell.
Red LED lighting illuminating the passenger footwell.
Purple LED lighting illuminating the passenger footwell.
Open glovebox and passenger footwell illuminated in purple.
Open glovebox and passenger footwell illuminated in white.
Two open car doors at night with white puddle lights illuminating the ground.
Two open car doors at night with purple puddle lights illuminating the ground.
Driver area with white footwell lighting beneath the steering wheel and center screen.
Driver area with purple footwell lighting beneath the steering wheel and center screen.
Angled view of white footwell lighting around the driver pedals.
Angled view of purple footwell lighting around the driver pedals.
Four rectangular LED light modules with clear lenses displayed on white.
LED modules glowing white, blue, purple and red, with views of the black housing and clear lens.
LED module illustration showing the illuminated lens, internal components and a comparison with the original lamp.
Top-view diagrams of Model S, 3, X and Y marking footwell, door, glovebox and luggage-compartment light locations.
Three installation steps showing an orange pry tool removing the original lamp, disconnecting it and fitting an LED module.
Tesla interior with soft blue footwell ambient lighting at dusk
White LED lighting illuminating a dark carpeted passenger footwell.
Red LED lighting illuminating the passenger footwell.
Purple LED lighting illuminating the passenger footwell.
Open glovebox and passenger footwell illuminated in purple.
Open glovebox and passenger footwell illuminated in white.
Two open car doors at night with white puddle lights illuminating the ground.
Two open car doors at night with purple puddle lights illuminating the ground.
Driver area with white footwell lighting beneath the steering wheel and center screen.
Driver area with purple footwell lighting beneath the steering wheel and center screen.
Angled view of white footwell lighting around the driver pedals.
Angled view of purple footwell lighting around the driver pedals.
Four rectangular LED light modules with clear lenses displayed on white.
LED modules glowing white, blue, purple and red, with views of the black housing and clear lens.
LED module illustration showing the illuminated lens, internal components and a comparison with the original lamp.
Top-view diagrams of Model S, 3, X and Y marking footwell, door, glovebox and luggage-compartment light locations.
Three installation steps showing an orange pry tool removing the original lamp, disconnecting it and fitting an LED module.
Tesla interior with soft blue footwell ambient lighting at dusk
White LED lighting illuminating a dark carpeted passenger footwell.
Red LED lighting illuminating the passenger footwell.
Purple LED lighting illuminating the passenger footwell.
Open glovebox and passenger footwell illuminated in purple.
Open glovebox and passenger footwell illuminated in white.
Two open car doors at night with white puddle lights illuminating the ground.
Two open car doors at night with purple puddle lights illuminating the ground.
Driver area with white footwell lighting beneath the steering wheel and center screen.
Driver area with purple footwell lighting beneath the steering wheel and center screen.
Angled view of white footwell lighting around the driver pedals.
Angled view of purple footwell lighting around the driver pedals.
Four rectangular LED light modules with clear lenses displayed on white.
LED modules glowing white, blue, purple and red, with views of the black housing and clear lens.
LED module illustration showing the illuminated lens, internal components and a comparison with the original lamp.
Top-view diagrams of Model S, 3, X and Y marking footwell, door, glovebox and luggage-compartment light locations.
Three installation steps showing an orange pry tool removing the original lamp, disconnecting it and fitting an LED module.

TESERY Footwell / Puddle / Glovebox / Frunk / Trunk LED Lights for Model 3/Y/S/X

★★★★★ (36)
Regular price £29.00 GBP
Sale price £29.00 GBP Regular price £38.00 GBP
Unit price
Save 24%
%3Cp%3EEarn%20[points_amount]%20when%20you%20buy%20this%20item.%3C/p%3E
Please Select Your Color Before Adding to Cart

This is our standard fixed-color edition — choose your preferred color (Blue, White, Purple, or Red) from the options above and place your order. Each set comes in a single color as selected.

Looking for more flexibility? Our upgraded RGB adjustable-color version lets you switch between four colors. Shop the RGB upgrade here →

Compatibility Note: This product is designed for square-shaped factory light sockets only. The newer Tesla models with round-shaped factory welcome lights are NOT compatible. Please check your vehicle's socket shape before purchasing.
Ice Blue
White
Purple
Red
Pay with Ease
  • Visa
  • Mastercard
  • American Express
  • Shop Pay
  • Apple Pay
  • Google Pay
  • Amazon
  • Discover
  • Diners Club
  • Bancontact
  • iDEAL Wero
  • USDC
  • AliPay
  • Bizum
  • MB WAY
  • Satispay
Ask a question

Ask a Question

* Required fields

 Size guide Share
Shop with confidence

  • Free Worldwide Shipping

    Orders US$149+

    Orders US$149+ ·Nov 22 – Nov 26

  • 30-Day Returns & Exchanges

    Policy details

  • 30-Day Price Protection

    We refund the price difference.

  • Lifetime Customer Support

    One-to-one product help.

    Contact us
Tesla interior with soft blue footwell ambient lighting at dusk

TESERY Footwell / Puddle / Glovebox / Frunk / Trunk LED Lights for Model 3/Y/S/X

Product description
Shipping & Return

Tesla Interior LED Lights

Replace dim factory lamps with a cleaner, more visible glow for the footwells, doors, glovebox and cargo areas. Choose Blue, White, Purple or Red and install directly into the original square light socket.

Tesla interior with soft blue footwell ambient lighting at dusk
Plug & PlayNo cutting, drilling or rewiring
Four ColorsBlue, White, Purple or Red
Flexible CoverageChoose 4, 7 or 11 PCS

Compatibility Note

This product is designed for original square-shaped factory light sockets only. Tesla light configurations vary significantly by model and production year. Newer vehicles with round-shaped factory welcome-light sockets are not compatible, and positions without an original factory lamp cannot use this product. Please inspect the actual lamp and socket in your vehicle before ordering and choose the set according to your vehicle's real configuration.

Soft Color, Clear Cabin Detail

The revised blue presentation uses a lighter, more natural tone. Carpet texture, mats and cabin contours remain visible instead of disappearing into an overly dark or neon-blue glow.

Tesla passenger footwell with soft blue ambient lighting and visible carpet texture

Choose The Coverage You Need

Start with the four footwell and puddle-light positions, or extend the same color to additional door, glovebox, front-trunk and rear-trunk locations.

4 PCSFootwell & puddle lights · front + rear
7 PCSFootwell · door panels · glove compartment
11 PCSFootwell · door · glovebox · front trunk · rear trunk
Soft blue ambient lighting shown in Tesla footwell and cargo areas

Every Lighting Position

See where each kit can add light. The 7 PCS set extends beyond the footwells to the doors and glovebox, while the 11 PCS set also covers compatible front-trunk and rear-trunk lamp positions.

Tesla passenger footwell illuminated by a soft blue replacement LED
FootwellFront and rear footwell lamp positions
Tesla door and puddle-light positions illuminated in soft blue
Door / Puddle LightCompatible square door lamp positions
Tesla glovebox illuminated by a soft blue replacement LED
GloveboxGlove compartment lamp position

Frunk + Trunk Locations

The full 11 PCS set adds the compatible cargo-area lamp positions shown in the original vehicle layout diagram.

Front Trunk / Frunk Rear Trunk
Installation position diagram showing footwell, door, glovebox, front trunk and rear trunk lamp locations for Tesla Model S, Model 3, Model X and Model Y

Plug-And-Play Installation

Use a small flat-head screwdriver to remove the factory lamp, connect the Tesery LED to the existing socket and snap the unit back into place. No splicing or special tools required.

Three-step guide showing a Tesla factory lamp being removed and replaced

Product Specifications

CompatibilityTesla vehicles with an existing original square-shaped factory lamp and matching connector at the intended position; verify the actual vehicle configuration
Socket TypeOriginal square-shaped factory light sockets only; round sockets are not compatible
Color OptionsBlue, White, Purple or Red
Package Options4 PCS, 7 PCS or 11 PCS
InstallationDirect replacement of an existing factory lamp; positions without an original lamp cannot use this product
Tool RequiredSmall flat-head screwdriver

Frequently Asked Questions

Which Tesla Vehicles Are Compatible?
Compatibility cannot be confirmed by model name or production year alone because factory lamp layouts vary. The intended position must already have an original factory lamp with a square-shaped socket and matching connector. Please inspect your actual vehicle before ordering.
Will These Fit Round Welcome-Light Sockets?
No. Round-shaped factory welcome-light sockets are not compatible. This product only replaces original square-shaped factory lamp modules.
Can I Install These Where There Is No Original Factory Lamp?
No. This is a replacement LED module, not a new wiring kit. An original factory lamp and compatible connector must already be present at the intended installation position.
Do I Need Special Tools Or Wiring?
No special wiring is required for a compatible existing lamp position. A small flat-head screwdriver is used to remove the factory lamp before the replacement LED plugs into the existing connector.
Will The LEDs Affect Vehicle Range?
The LED modules are designed for low power consumption and should not have a meaningful impact on vehicle range.
What Is Included In The 4 PCS Option?
The 4 PCS kit includes two lights for the front footwell/pedal area and two for the rear/front-seat-under area, covering four compatible footwell positions.
Does This Add A Dashboard Or Vent Light Strip?
No. This product replaces compatible factory lamp modules in the selected positions. It does not add a continuous dashboard or air-vent ambient-light strip.
Check The Original Lamp And Socket Before Ordering Purchase according to the actual vehicle configuration. The intended position must already have an original factory lamp with a square-shaped socket; round sockets and positions without an original lamp are not compatible.

Important Notice:

If you encounter any issues after installation, please contact us before removing the product.

Providing vehicle details (model/year/VIN) along with photos or short videos will help us resolve your issue much faster.

Products that are removed or altered before troubleshooting may not be eligible for return or replacement.

TESERY Return Policy

We are committed to providing you with a worry-free and enjoyable shopping experience. Should you need to return a product, we offer a clear and convenient return service.

1.Order Cancellation

  • You can request to cancel your order before it has been shipped.

  • If your order has already been shipped, we will do our best to intercept it, but success is not guaranteed.

  • Please submit your cancellation request via email or through our online customer service.

2. 30-Day Return Policy

You have the right to request a return within 30 days from the date you receive your item. To ensure a smooth process, please make sure to contact us and initiate the return within this 30-day period.

3. Eligibility for Returns

To be eligible for a refund, returned products must meet the following conditions:

  • The item must be in the same condition as when you received it—unworn, unused, with tags, and in its original packaging.

  • Proof of purchase is required.

4. Return Reasons & Associated Fees

We handle two types of returns:

  • Quality Issues or Damaged Products:

    • If the item you received is defective, damaged, or if you received the wrong item, please contact us immediately. We will issue a full refund or provide a replacement and will cover all associated costs.

  • Non-Quality-Related Returns (e.g., Personal Preference):

    • For returns initiated due to personal preferences (e.g., change of mind, dissatisfaction with the color or style), a 15% restocking fee will be applied, and the customer is responsible for covering the return shipping costs.

5. The Return Process

To start a return, please follow these steps:

  1. Contact Us:

  2. Receive Instructions:

    • Once your return request is approved, we will send you detailed return instructions, including the shipping address and packing guidelines.

  3. Ship the Item Back:

    • Please ship the item back according to the instructions provided. Please note that items sent back to us without first requesting a return will not be accepted.

6. Non-Returnable Items

Due to their nature, certain types of items are not eligible for return:

  • Customized Products: For example, steering wheels and wheels that are explicitly marked as custom products cannot be returned for non-quality-related issues.

  • Specific Items: This includes gift cards, hazardous materials, or flammable liquids/gases.

If you have any questions about the eligibility of a specific item, please contact us before making a purchase.

7. Refunds & Exchanges

  • Refunds:

    • Once we receive and inspect your returned item, we will notify you and inform you if the refund has been approved. Approved refunds will be processed automatically to your original payment method within 1-5 business days. The final credit posting time depends on your bank or credit card company.

  • Exchanges:

    • For the fastest way to ensure you get what you want, we recommend that you return the item you have, and once the return is accepted, make a separate purchase for the new item.

8. After-Sales Support Requirements

To ensure a fair and efficient resolution process, customers are required to provide necessary information when requesting after-sales support, including but not limited to:

- Vehicle details (model, year, VIN)
- Clear description of the issue
- Supporting photos and/or short videos demonstrating the problem

Please note:

Failure to provide the required information may prevent us from accurately diagnosing the issue and may result in delays or inability to process returns, refunds, or replacements.

For products that have been installed, modified, or removed without prior communication, TESERY reserves the right to decline return requests if the product condition cannot be verified.

★★★★★
★★★★★
★★★★★
★★★★★