Tesla Model X Front Control Arm Kit, 6-Piece (2016–2021)
-
Free Worldwide Shipping
Orders US$149+ -
30-Day Returns & Exchanges
Policy details -
30-Day Price Protection
-
Lifetime Customer Support
Contact us
Tesla Model X Front Control Arm Kit, 6-Piece (2016–2021)
Six complete front arms for Model X (2016–early 2021)
This is a front-only refresh: both aluminum upper arms, both forward lower (fore) arms, and both rearward lower (aft) arms. It is not an upper-arm-only kit, and it does not fit Model S (steel uppers) or Model 3 / Y. 2021+ refresh / Plaid: send a photo of the stamp first.
- 6 complete arm assemblies with ball joints and bushings already pressed in
- 2 camber bolts as shown in the photos (Tesla-style 2007106) — alignment is still done by the shop
- Aftermarket parts built to the Tesla OE numbers below — not a Tesla Service Center boxed original unless the packing says so
- Rear arms, sway-bar links, and tie rods are not included
- Model X uses air suspension. A lift and Tesla Jack Mode are expected. Shop time is typically half a day plus a 4-wheel alignment
- Uninstalled quality issues: 30-day exchange. Installed parts are not returnable for change of mind — see our warranty policy
What's in the box
Match these numbers to the stamp on your arms. The two silver A-arms are Model X uppers — not the black steel uppers on Model S. Photos also show two camber bolts.
| Qty | Part (plain name) | OE on this kit | Also fits if your stamp is |
|---|---|---|---|
| 1 | Front upper arm, left (aluminum) | 1027322-00-E | 1027322-00-D (earlier letter). -00-F / G — photo first |
| 1 | Front upper arm, right (aluminum) | 1027327-00-E | 1027327-00-D. -00-F / G — photo first |
| 2 | Front lower rearward / aft arm (same part left or right) | 1027351-00-C | 1027351-00-D / E or 1048951-00-A / B / C (later letter of the same aft arm) |
| 1 | Front lower forward / fore arm, left | 1041570-00-B | 1041570-00-A or 6007998-00-C. Not 1420341 / 1620341 |
| 1 | Front lower forward / fore arm, right | 1041575-00-B | 1041575-00-A or 6006664-00-C. Not 1420346 / 1620346 |
Will this fit?
Look at the stamp on the arms. Year helps, stamp decides. Same OE worldwide for this generation — no US / EU / China split. All Model X are AWD.
Model X · 2016–early 2021
Pre-refresh X when stamps match the table, including upper letters D / E and aft 1048951.
2021+ refresh / Plaid, or F/G upper
New X / Plaid, uppers already 1027322-00-F / G, or fore arms 1420341 / 1620341. Later F letters are not automatically the same as this E kit. Email stamp + VIN to support@tesery.com.
Model S, 3, or Y
Model S uses different steel uppers (1043965 / 1043966) — use the Model S kit. Model 3 / Y are a different platform. Do not order if the upper already says 1420321 / 1420326.
Install notes
Enable Jack Mode before you lift the car. If you torque the inner bushing bolts with the wheels hanging, the new rubber is pre-twisted and can tear early. Set ride height, then torque. Tesla uses a ride-height tool on the upper arm. Replace one-time lock nuts. Then a 4-wheel alignment. The two camber bolts in this kit are for the aft arm — the shop still sets camber on the alignment rack.
| Joint | Typical Tesla spec | Note |
|---|---|---|
| Upper arm to knuckle | 60 Nm | Replace the lock nut |
| Upper arm to body | 68 Nm | From Tesla Model X service procedure; use the ride-height tool |
| Lower arms to knuckle / subframe | See current service manual | Value depends on the bolt. Always at ride height. |
Most independent shops book half a day plus a 4-wheel alignment. A lift is expected — the front drive unit makes this tighter than a Model 3 job. Torque figures above are from Tesla service information for 2016–2021 Model X — confirm on the manual for your VIN before you tighten anything.
Why replace the set
Clunks, wander, inner tire wear
Worn front bushings and ball joints let the wheel move under braking and over bumps. Refreshing left and right together keeps the geometry even.
No press required
These are complete arms. This kit is the no-press, full-arm route for a pre-refresh Model X front end.
Need a different part?
FAQ
Is this only the upper arms? Is it 6 pieces or 8?
Details2021+ refresh / Plaid Model X?
DetailsModel S, 3, or Y?
DetailsMy upper says D or F, not E.
DetailsMy aft arm says 1048951 or 1027351-00-E, not C.
DetailsRWD vs AWD? Air suspension?
DetailsAre these genuine Tesla-boxed parts?
DetailsBolts and alignment? What about 2007106?
DetailsHow long does install take?
DetailsWarranty?
DetailsImportant Notice:
If you encounter any issues after installation, please contact us before removing the product.
Providing vehicle details (model/year/VIN) along with photos or short videos will help us resolve your issue much faster.
Products that are removed or altered before troubleshooting may not be eligible for return or replacement.
TESERY Return Policy
We are committed to providing you with a worry-free and enjoyable shopping experience. Should you need to return a product, we offer a clear and convenient return service.
1.Order Cancellation
-
You can request to cancel your order before it has been shipped.
-
If your order has already been shipped, we will do our best to intercept it, but success is not guaranteed.
-
Please submit your cancellation request via email or through our online customer service.
2. 30-Day Return Policy
You have the right to request a return within 30 days from the date you receive your item. To ensure a smooth process, please make sure to contact us and initiate the return within this 30-day period.
3. Eligibility for Returns
To be eligible for a refund, returned products must meet the following conditions:
-
The item must be in the same condition as when you received it—unworn, unused, with tags, and in its original packaging.
-
Proof of purchase is required.
4. Return Reasons & Associated Fees
We handle two types of returns:
-
Quality Issues or Damaged Products:
-
If the item you received is defective, damaged, or if you received the wrong item, please contact us immediately. We will issue a full refund or provide a replacement and will cover all associated costs.
-
-
Non-Quality-Related Returns (e.g., Personal Preference):
-
For returns initiated due to personal preferences (e.g., change of mind, dissatisfaction with the color or style), a 15% restocking fee will be applied, and the customer is responsible for covering the return shipping costs.
-
5. The Return Process
To start a return, please follow these steps:
-
Contact Us:
-
Send an email to
support@tesery.com/ service@tesery.com or use our live chat to inform us of your return request.
-
-
Receive Instructions:
-
Once your return request is approved, we will send you detailed return instructions, including the shipping address and packing guidelines.
-
-
Ship the Item Back:
-
Please ship the item back according to the instructions provided. Please note that items sent back to us without first requesting a return will not be accepted.
-
6. Non-Returnable Items
Due to their nature, certain types of items are not eligible for return:
-
Customized Products: For example, steering wheels and wheels that are explicitly marked as custom products cannot be returned for non-quality-related issues.
-
Specific Items: This includes gift cards, hazardous materials, or flammable liquids/gases.
If you have any questions about the eligibility of a specific item, please contact us before making a purchase.
7. Refunds & Exchanges
-
Refunds:
-
Once we receive and inspect your returned item, we will notify you and inform you if the refund has been approved. Approved refunds will be processed automatically to your original payment method within 1-5 business days. The final credit posting time depends on your bank or credit card company.
-
-
Exchanges:
-
For the fastest way to ensure you get what you want, we recommend that you return the item you have, and once the return is accepted, make a separate purchase for the new item.
-
8. After-Sales Support Requirements
To ensure a fair and efficient resolution process, customers are required to provide necessary information when requesting after-sales support, including but not limited to:
- Vehicle details (model, year, VIN)
- Clear description of the issue
- Supporting photos and/or short videos demonstrating the problem
Please note:
Failure to provide the required information may prevent us from accurately diagnosing the issue and may result in delays or inability to process returns, refunds, or replacements.
For products that have been installed, modified, or removed without prior communication, TESERY reserves the right to decline return requests if the product condition cannot be verified.